Interlux Fiberglass Surface Prep

Color: YMA601V-Pink (Top Coat)
Specific Gravity: 1.1
Volume Solids 48%
Typical Shelf Life: 2 yrs
VOC (As Supplied): 25 g/lt

Preparation: These instructions are for the surface preparation of bare fiberglass, Hypalon and PVC, previously painted topside paint and/or clear epoxy resin. Apply Fiberglass Surface Prep with a brush or 3/8" nap roller. Scrub surface thoroughly with a maroon Scotch-Bright® pad being mindful to scrub all surface areas. Remove Fiberglass Surface Prep by wiping off with a clean, wet cloth, changing cloths frequently. Repeat until no traces of Fiberglass Surface Prep YMA601V remain. To be certain the contamination has been removed, run water over the surface. If water beads up or separates, repeat instructions above. As soon as surface is dry it is ready for application of an Interlux antifouling system or topside primer and/or finish paint, following the label instructions of the product being used. If the overcoating time exceeds 4 hours from cleaning, rewipe the surface with a clean, wet cloth and allow surface to dry before applying your Interlux antifouling system or topside primer and/or finish paint, following the label instructions of the product being used.

System uses for Fiberglass Surface

Simple No Sand System - Prepare the bare fiberglass following the instructions above. As soon as surface is dry, apply the first coat of Fiberglass Bottomkote Aqua within 4 hours. If the overcoating time exceeds 4 hours wipe surface with a clean, wet cloth and allow surface to dry. Follow the label instructions for overcoat times for second coat of Fiberglass Bottomkote Aqua.
No Sand System - Prepare the bare fiberglass following the instructions above. As soon as surface is dry, apply one coat of Fiberglass No Sand Primer YPA200 within 4 hours. If the overcoating time exceeds 4 hours wipe surface with a clean, wet cloth and allow surface to dry. Follow the label instructions for overcoat times between Fiberglass No Sand Primer YPA200 and Interlux antifouling paints.
Ultimate No Sand System - Prepare the bare fiberglass following the instructions above. As soon as surface is dry, apply one coat of Interprotect 2000E within 4 hours. If the overcoating time exceeds 4 hours wipe surface with a clean, wet cloth and allow surface to dry. Follow the label instructions for overcoat times between Interprotect 2000E and Interlux antifouling paints.
Simple Antifouling System for Inflatable Boats - Fiberglass Surface Prep YMA601V can be used to prepare Hypalon and PVC. Prepare the surface following the instructions for bare fiberglass above. As soon as surface is dry, apply the first coat of Fiberglass Bottomkote Aqua within 4 hours. If the overcoating time exceeds 4 hours wipe surface with a clean, wet cloth and allow surface to dry. Follow the label instructions for overcoat times for second coat of Fiberglass Bottomkote Aqua.

Hints

Mixing: Stir or shake contents thoroughly before use.
Roller: 3/8" nap roller
Cleaner: Water
Some Important Points: Keep from freezing.

Compatibility/Substrates: For use on bare fiberglass, Hypalon and PVC, previously painted topside paint and/or clear epoxy resin.
Application Methods: Roller