Over time contaminants can build up and cause the finish of your Awlgrip/Awlcraft 2000 paint to appear dull.  You can restore the gloss of a freshly painted boat and prevent the premature aging caused by contaminates by following these steps:

• Wash your Awlgrip or Awlcraft surface with Awlwash mixed with water (1-2 capfuls in a bucket of water for washing) using soft, non-abrasive cloths and rinse well. Doing so on a regular basis (once per month) will help control dulling buildup.
• Solvent cleaning of Awlgrip only: Awlprep and Awlprep Plus can be used to aid in removal of stains or markers and to soften or remove heavy build ups of grease and grime, or spray paint on the topcoat and toluene, lacquer thinner, M.E.K., acetone can be used as well.
• Solvent cleaning of Awlcraft 2000 and Awlgrip HDT only: Awlprep or mild solvents (mineral spirits, xylene, kerosene and diesel fuel) should be used.

In both cases apply solvents with soft cloths and do not allow the chemicals to dry on surface, puddle or soak. Wash with Awlwash to prevent remaining solvent to attack paint. As always when working with solvents, test in an inconspicuous area first.

 Distilled white vinegar and hot water will aid in removing salt stains, always follow with Awlwash.

Protecting the Surface

Awlcare can be applied to the surface like a wax to remove pollutants (such as diesel soot), protects the finish and leaves a glossy shine. Awlcare should be applied regularly to protect against pollutants. It can be removed with Awl-Prep Plus (Awlgrip only) when it’s time to repaint. What to avoid with Awlgrip and Awlcraft 2000:

• Abrasives
• Polishing compounds
• Traditional waxes as they tend to break down rapidly, yellow and attract dirt
• Acid based products such as teak or metal cleaners and strong solvents on Awlcraft 2000, Awlbrite Clear or Awlspar Varnish.
• Trapped moisture from supplies as paint can blister or delaminate

AVOID:

• Avoid Traditional Waxes
• Awlgrip topcoat only: Regular applications of Awlcare will help temporarily seal and restore shine to painted surfaces that have become porous due to age or mistreatment, helping to maintain a satisfactory appearance until there is time to repaint.
• Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand. Never apply or buff Awlcare with a machine.
• Avoid abrasive and polishing compounds
• Avoid strong solvents (eg. lacquer thinner, M.E.K., acetone) to clean Awlcraft 2000, Awlgrip HDT, Awlbrite Clear or Awlspar varnish.